For your best price or technical questions
Modbus / EtherNet/IP Gateway
GT100-EI-RS485
909-977-2988
WhatsApp
WhatsApp
+1-909-977-2988
The GT100-EI-RS485 gateway enables seamless connectivity between Modbus RTU/ASCII devices and EtherNet/IP networks, with support for a wide range of PLCs and controllers including ControlLogix, CompactLogix, ABB, and Omron. This gateway features 1 RS485 serial port, making it ideal for easy integration into a wide variety of applications.
-
Technical Specification
-
Order Information
-
Download
-
Quick Start Guide
-
Selection Guide
-
Case Study
-
Related Products
-
Warranty & Service
Technical Specification:
- EtherNet/IP network is independent with Modbus network.
-
IEEE802.u 100BASE-T Ethernet 10/100M.Built-in Ethernet switching functionality, supporting cascading connections.
-
Supports static IP configuration and DHCP; assigns a default IP address of 192.168.0.11 automatically if DHCP times out.
- Serial port supports Modbus mode or transparent transimission, which is suitable for some barcode scanner and RFID.
- Supports ODVA standard EtherNet/IP communication protocol.
-
Supports Non-DLR functionality, allowing direct integration into a DLR ring network.
- RS485 interface, half duplex, baud rate: 1200,2400, 4800, 9600, 19200,38400, 57600, 115200 bps optional, check bit: None, odd, even, mark and space optional; 1 or 2 bit stop bit optional.
- RS485 serial port supports terminal resistor, pull-up and pull-down resistors
- Acts as Modbus Master at Modbus side:
- Supports function code 01H, 02H, 03H, 04H, 05H, 06H, 0FH, 10H
- Each master can configure up to 100 Modbus commands.
-
Function codes 03H
| File | Type | Time | Download |
|---|
