Technical Specification:

• EtherNet/IP network is independent with Modbus network.
• IEEE802.u 100BASE-T Ethernet 10/100M.Built-in Ethernet switching functionality, supporting cascading connections.
• Supports static IP configuration and DHCP; assigns a default IP address of 192.168.0.11 automatically if DHCP times out.
• Serial port supports Modbus mode or transparent transimission, which is suitable for some barcode scanner and RFID.
• Supports ODVA standard EtherNet/IP communication protocol.
• Supports Non-DLR functionality, allowing direct integration into a DLR ring network.
•  RS485  interface, half duplex, baud rate: 1200,2400, 4800, 9600, 19200,38400, 57600, 115200 bps optional, check bit: None, odd, even, mark and space optional; 1 or 2 bit stop bit optional.
• RS485 serial port supports terminal resistor, pull-up and pull-down resistors
• Acts as Modbus Master at Modbus side:
  • Supports function code 01H, 02H, 03H, 04H, 05H, 06H, 0FH, 10H
  • Each master can configure up to 100 Modbus commands.
  • Function codes 03H, 04H, 06H ,10H and 17H support the "Byte Swap" function, and it can help users solve the problem of data format between two different networks.
• The maximum number of input and output bytes of EtherNet/IP:
  • Maximum number of input bytes: 492Bytes.
  • Maximum number of output bytes: 492Bytes.
• Power supply: 24VDC (9V ~ 30V), 110mA (24VDC).
• Working temperature:-4°F to 140°F (-20°C to 60°C); Rel. Humidity 5%-95% (non condensing).
• Dimension (W*H*D): 1 in*4 in*3.6 in (25mm*100mm*90mm).
• Installation: 35mm DIN rail.